Home
.jpg "Looking forward")
Welcome to the Case IH Advanced Farming Systems (AFS) North American customer website. This site contains answers to many frequently asked questions about Case IH AFS systems, along with downloads and other reference information. Don't see an answer to your question? Contact your local Case IH dealer or the AFS Customer Support Center!
If you're new to AFS, we invite you to start with the Overview.
----------
The list below displays questions and answers across all categories, with the most recent questions listed first. To view questions and answers by category, please select a category from the navigation menu on the left.
Yes. The Patriot 3320, 3330, and 4420 can now be ordered Case IH AFS AccuGuide-ready or Case IH AFS AccuGuide-complete from the factory.
The AFS Pro 600 display will be used with this system.
Yes. A DVD, "AFS Pro 600 Axial Flow Overview, Cab, Controls, and Operation" is available.
Ask your local Case IH dealer for a copy of DVD10900.
Case IH recommends and sells SanDisk brand CompactFlash cards and adapters for use in the AFS Pro 600 display.
Datacard capacity must be from 32 MB to 4GB MB. SanDisk CompactFlash card and adapter kits are available through your local Case IH dealer.
The part number for a 512 MB card and adapter is 87646115.
The part number for a 4GB card and adapter is 84187624.
If you purchase a card from Case IH, it will be formatted correctly for use in your AFS Pro 600. If you purchase a card from another retailer, verify that it is formatted as "FAT" (also called "FAT16") or FAT32.
Yes. You should always assign a Default Rate for the Product when defining a Product in the Product Setup screen (Toolbox > Product).
You should also assign the Min Rate, Max Rate, and Delta Rate for the Product. This will ensure that the Product setup is completed successfully.
When a prescription is exported from the desktop software, the software will ask the user for a default rate to be used when the vehicle leaves the prescription zone. If a default rate is not specified, the prescription will use a default rate of "0" for product application outside the prescription zone.
The Default Rate assigned in the Product Setup screen (Toolbox > Product) is only used during manual product application.
The most common cause for missing planter seed graphs on run screens of the Pro 600 is improper configuration settings for rows.
Go to Toolbox > Config, and be sure the "Section x Rows" windows are populated with the correct number of planter row units per section.